롤링다이스's
rollingdice

Cheat in Network mode:
Hold ALT key and enter iddtiddtiddtiddt in map mode.

Deathmatch cheat mode:
Enter to the Talk mode be pressing T key in the map. Hold ALT and type
iddt several times. This will show the entire map. Re-enter the code
to show all item locations. Reenter the code to go back to normal mode.

Wolfenstein:
Type idclev32 or idclev31 during game play to restart in a totally new level.
When you complete one of those levels you will always start on the level
suburbs and continue your Doom 2 game.

Cheat mode:
While playing the game, type any of the following cheat codes:

Code - Effect
idbeholda - Reveal automap
idbeholdi - Enable Temporary invisibility
idbeholdl - Light amplification visor
idbeholdr - Spawn Anti-radiation suit
idbeholds - Get Berserker strength
idbeholdv - Enable Temporary invincibility
idchoppers - Get a Chainsaw
idclev - Play on eany level
idclip - No clipping mode
iddqd - Invincibility
iddt - Turn on/off full map; Turn on/off full map and objects; restore normal
idfa - Reset ammo
idkfa - Get all weapons, keys, ammo, and 200% armor
idmus - Change music to indicated level
idmypos - Show coordinates and heading

Cheat mode (command line):
Run the game with the following command line parametter:
doom -devparm

Command line parameter - Effect
-wart (1-3) (1-9) - Load PWAD named ExMy.wad
-warp (1-3) (1-9) - Warp to episode (1-3) level (1-9)
-turbo (1-255) - Increases the speed of the marine
-statcopy - Unknown
-skill (1-5) - Start at indicated skill level*
-shdev - Internal development, texture mapping
-right - Set up a network terminal for "right view"*
-respawn - Enemies respawn in non-Nightmare*
-regdev - Internal development, texture mapping
-recordfrom (0-5) (filename) - Record a demo from saved game*
-record (filename without .LMP) - Record demo until you finish or die*
-playdemo (filename without .LMP)  - Play back recorded demo*
-phase - Activate phase shifting on PAS16
-opl3 - Activate stereo music through OPL-3 on PAS16
-nosound - Turn off sound
-nosfx - Turn off sound effects
-nomusic - Turn off background music
-nomouse - Turn off the mouse
-nomonsters - No monsters*
-nojoy - Turn off the joystick
-nodraw - Internal bugging switch
-nodes (1-4) - Starts NetDoom with indicated player amount*
-noblit - Internal bugging switch
-maxdemo - Set maximum size of LMP recording*
-loadgame (0-5) - Starts from indicated saved game*
-left - Set up a network terminal for the "left view"*
-GUS1 - Uses new GUS instrument mapping (default)
-GUS - Uses original GUS instrument mapping
-file (.wad filename) - Use external PWAD file*
-fast - Nightmare mode without respawn*
-episode (1-3) - Start at indicated episode*
-devparm - Developers mode
-debugfile (name) - Dump debug info to debug(name).txt
-deathmatch - Start NetDoom in Deathmatch mode*
-control - Unknown
-config (file name) - Read an alternate configuration file*
-comdev - Internal development, texture mapping
-cdrom - Uses C:\DOOMDATA directory for data
-avg - End the game after twenty minutes
-altdeath - Activates DeathMatch v2.0 (v1.4 and above)
@(filename) - Read in a command line parameter file
-timedemo (filename without .LMP) - Calculates number of times screen
is redrawn during a demo

* - The activate the indcated cheats, you don't have to type the -devparm
in the command line. Most of these parameters can be mixed and matched to
create different effects.

Change music in Doom II:
Type the IDMUS## code where ## is a 2 digit code indicating a song number.
A list of the numerical values for all the Doom II songs follows.

00   INTROA        
01   RUNNIN        
02   STALKS
03   COUNTD        
04   BETWEE        
05   DOOM
06   THE_DA        
07   SHAWN         
08   DDTBLU
09   IN_CIT        
10   DEAD          
11   STLKS2
12   THEDA2        
13   DOOM2         
14   DDTBL2
15   RUNNI2        
16   DEAD2         
17   STLKS3
18   ROMERO        
19   SHAWN2        
20   MESSAG
21   COUNT2        
22   DDTBL3        
23   AMPIE
24   THEDA3        
25   ADRIAN        
26   MESSG2
27   ROMER2        
28   TENSE         
29   SHAWN3
30   OPENIN        
31   EVIL          
32   ULTIMA
33   READ_M        
34   DM2TTL        
35   DM2INT

Secrets:

Level 15:
Type IDCLIP and just walk straight. You'll find a neat warp pentagram soon.

Level 30: IDCLIP yourself straight thru the demon's head. Shoot the
programmer's head on the severed stick to kill the last man. It screams.

Cheat Codes
During the game play, type any of the codes bellow:

Effect - Cheat code:
Show coordinates and heading - idmypos
Select any level - idclev[level number 01-32]
Reset ammunition - idfa
nvisible to enemies until attack - fhshh
No clip mode - idclip
Invincibile mode - iddqd
Get Light amplification visor - idbeholdl
Get Chainsaw - idchoppers
Get Anti-radiation suit - idbeholdr
Full map and objects - iddt
Full automap - idbeholda
Enable partial invisibility - idbeholdi
Enable invincibility (temporary) - idbeholdv
Destroy all enemies on the stage - fhhall
Change music for the indicated stage - idmus[level number 01-32]
Berserker strength - idbeholds
200% armour and unlock all weapons, keys, ammo - idkfa
No clipping (you can walk through walls) - idspispopd
god mode -god
luz estra -testlig

Network cheat mode
Hold [Alt] and enter "iddtiddtiddtiddt" in map mode.

Deathmatch cheat mode
Hit the "T" key in the map to enter talk mode. Then, hold [Alt] and
type "iddt" several times to show entire map. Repeat the cheat code
to reveal all items. If you re-enter the code again, the map will
return to normal.

ZDOOM.part01.rar

ZDOOM.part02.rar

ZDOOM.part03.rar

ZDOOM.part04.rar

ID Software
http://www.idsoftware.com/

레이븐소프트웨어
http://www.ravensoft.com

액티비전
http://www.activision.com/

해외 관련 사이트:
http://www.doomworld.com/

http://www.doomsdayhq.com/

http://www.newdoom.com/

http://ftp.nsk.su/cgi-bin/bbs2html?pub/msdos/games/heretic

http://www.teamtnt.com/

http://www.doomwadstation.com/dwsnews/

http://zdoom.org/

국내 관련 커뮤니티:
http://cafe.daum.net/doom

http://cafe.daum.net/doommaps

http://cafe.daum.net/Doomlmps

http://teamwmk.wo.ro/

http://cafe.daum.net/doomdoom

http://myhome.naver.com/goddoom/link1.htm

http://www.doom3korea.com/

http://teamwmk.wo.ro/

Tenebrae - Version 1.04 - Readme

System Req.
-----------
Tenebrae is not quake1 anymore, it uses more advanced graphics algorithms so it requires a much faster system to run.
These are the bare minimum reqs to run Tenebrae:

PIII 600
64 Mb RAM (More if you want to use some mods.)
Geforce1
Quake1
Water vissed maps

Recommended is a faster processor and a geforce4 / radeon 8500 class 3d card.

-The following 3d cards should work with tenebrae:
Nvidia: Geforce1, Geforce2, Geforce4 Mx, Geforce3, Geforce4 TI, GeforceFx 5200, 5600, 5900 (5200 may give very bad performance)
Ati: Radeon 7000, 7200, 7500, 8500, 9000, 9700+
Intel: 830M (some others maybe too, they run very slow in the 9 pass arb1 path)

From worst to best per vendor.

Note: There seems to be a driver bug in some detonator drivers (Nvidia) that causes a crash when you are using texture compression.  Disable this if you get a sudden crash during level loading.

-The following cards may work if users submit updated paths. (If you are an user and have the necesarry skills, sign up with sourceforge and I'll add you to the project.)
Matrox Parhelia

-The following cards will NOT work with Tenebrae ever.
ATI Rage Pro
3DFx Voodoo 1, 2, 3, 4, 5 and Banshee
Nvidia Riva TNT and Riva TNT2
3D labs Kyro II
Older and even more arcane 3d cards...
Just buy a new card, since they are all very old.

Installation
------------
If you downloaded the Installer version, just run it and follow the on screen instructions.
If you downloaded the zip verion, unzip the contents of the zip into the quake directory to install it.  Make sure you unzip ALL files in the archieve and make sure you are using folder info when unzipping. (In winzip check "use folder names")
Then install the vis patch, to download it see the downloads page on the Tenebrae website.  (If you have already applied the vis patch you don't have to apply it again.)
If you have unpacked the tenebrae pack file into the tenebrae directory you should delete those files,otherwise tenebrae will use the old 1.03 files in the directory and not the new 1.04 files (in pak0.pak)
If you don't know how to do this I recommend you just remove the tenebrae subdirectory in your quake directory and reinstall tenebrae.

Running
-------
There is a frontend for tenebrae, this allows you to modify some grapics options for tenebrae by using an easy windows interface.  You can start it by running tenebrae_launcher.exe .
If you are used to quake, you can always run tenebrae.exe directly altrough you will need to set your preferences via the console and the command line parameters.

Technial troubles?
------------------
These are some of the troubles lots of people had with previous versions.

S: The water is weird.
A: Install the vis patch (To download it, see website).

Q: How do I change my screen resolution?
A: Use the frontend, if you are against doing things easy use the "-width [resolution]" command line parameter.

More information & contact
--------------------------
http://tenebrae.sourceforge.net

Changes
-------

New in version 1.04
-Bug Fixes:
 -Doesn't crash anymore when it runs out of memory.  But it becomes
 very slow as it constantly loads the art from disk.
 -Network support fixed
 -New protocol version (less bandwith needed)
 -Connection Timeout timer bug fix
 -Fixed flashlight not removed on disconnect/death
 -e3m3 collision bugs fixed
 -Better normalization on ARB path (Using math instead of a cubemap)
 -Fixed ARB path (radeon 9700 bug)
 -Fixed smoke on ATI cards
 -Tga's with 'invert' flag work (thanks to Lord Havoc)
 -No hud or particles drawn in wireframe mode
 -Lots of other minor things and code cleanups
 
-New Features:
 -Multi surface md3's (md3's with multiple textues on the same model)
 -Play old quake demo's
 -"Official" misson disk support
 -Unmodified mod support (depending on the mod you can stil
 get certain problems)
 -gl_transformlerp (experimental and buggy, off by default)
 -Better tangent space calculations for meshes, allowing for mirrored
 parts of skins, ... to work properly 

New in version 1.03
-Bug Fixes:
 -double shadow in chase_acitve with sh_playershadow set to 1
 -condebug command line parameter
 -incorrect clipping of models when they are rotated
 -calculation of md3 bounding radius
 -brightness/gamma adjustment
 -alt+tab and minimization errors
 -quake movement bug when looking up/down
 -world clipping in chase_active

-New Major Features:
 -Particle/Decal scripting
 -Decals
 -underwater caustics
 -fog
 -compressed texture support
 -normal map support
 -texture resample interpolation
 -some more optimizations
 -PNG support for textures
 -ARB_fragment_program path (radeon 9500+ & geforceFX (if nvidia sends us one :D) )
 -Parhelia path (use -forceparhelia since it's hardlocking the machine with current drivers)

-New Minor Features:
 -gl_gloss cvar to control glossmap value
 -spiralling console (activate with con_spiral)
 -clock on console
 -sndchannels game parameter to control sound channels
 -sndspeed game parameter to control sample rate
 -sndbits game parameter to control bits per second
 -pause demos with pausedemo cvar
 -removed pak naming convention
 -nobumpmaps game parameter to disable bumpmaps
 -snd_reversestereo cvar for people with reversed wiring or SB16 sound cards
 -increased pak file limit from 10 to 256
 -Quake3 style timescale cvar
 -windows clipboard pasting to console
 -previous weapon switching (use impulse 12)
 -user directory support (linux)
 -glossmap has to be the same size as normal map (it had to be the same size as color map previously)

New in version 1.02
- Speed optimizations in different places, mainly due to the better caching of volumes and tangent space light vectors.
- Bug fixes, some of the more important ones are:
 -Bug with world tangent space and high resolution textures.
 -Bugs with alias tangent space (total rewrite)
 -Overriden colormaps did not get an autogenerated bumpmap
 -Crash when using high res textures (> 512*512)
 -Crash when shadow volume buffer overflowed (It's now bigger and should not crash anymore)
 -Bug with incorrect GL_CLAMP behaviour on nvidia drivers.
 -Bug resulting in some shadow volumes giving errors.  (e.g. Nailgun)
 -Bug that caused some high resolution modes not to show up when the user had a lot of modes available.
- New features
 -Radeon support (Thanks to Jarno Paananen)
 -Mac port (Thanks to Axel Wefers)
 -Reflections
 -Glares (call them what you want, also commonly referred to as Light Blooms)
 -Md3 support
 -Animation interpolation
 -Luminance textures (local light for texture)
 -"Modern" particle engine
 -Uses lights from the original maps (less dark)
 -Player has been given a flash light (use following console command to toggle with z key: bind "impulse 100" z)
 -Flare grenades (Unlimited supply of nonexplosive light giving grenades, use 6 to toggle between grenade/flare)

New in version 1.01
- Added some checks to make things faster.  (Basically not everything was being clipped to the view frustum)

New in version 1.00
- Bumpmapping (and everything that comes with it, texture overriding, bumpmaps, ...)
- Editing capabilities are improved
- Fixed volume generation for alias models
- Fixed world-vertex 0 bug
- Fixed other bugs

Tenebrae.part1.rar

Tenebrae.part2.rar

Tenebrae.part3.rar